Trabajar

How to measure for tile when completing a bathroom remodel

Imagine this, you are thinking of remodeling a bathroom and already have an established budget. You are at a tile shop and see a tile sample you like. The price of the tile is $5.00 a square foot. How do you know if this $5.00 a square foot tile is within your budget? In addition to the tile, how much should I budget for the grout and sealer?

Juegos

While choosing the theme for cheap bathroom accessories set, you must see that the theme matches your choice and taste. Some of the themes which are commonly in use include frogs, fish, beach scenes, flowers and tropical. Based on these themes, the items which you can easily decorate include soap, soap dish, drinking cup, toothbrush holder, shower curtain and soap with dish.

Trabajo Empleo

How to Measure

Let’s go through an example to help you go through the tile measuring process. In this example, we are going to install tile for a bathtub with a shower surround.

For a bathtub with a shower surround, you will need tile for the three walls. The tile will be installed to a height of 6 feet (6′) above the tub deck.

The first wall is 5 feet wide. The two end walls are each 3 feet wide. To determine the tile square footage, you need to measure the width of each of the three walls and multiply it by the height of your shower surround.

Let’s start measuring the first wall:

• 5′ wide (60 inches) by 6′ feet tall. 5 X 6 = 30 square feet.

Then you need to measure both end walls:

• 3′ feet deep (36″) X 6′ tall. 3 X 6 = 18 Square feet.
• 3′ feet deep (36″) X 6′ tall. 3 X 6 = 18 Square feet.

Then, you need to add the measurements of all three walls together:

• 66 square feet of field tile is needed for the shower surround.

I recommend to my clients to account for a 20% waste factor when setting tile. Keep in mind the tile could be discontinued, the tile could be on back order for numerous weeks, or many other problems could arise if you run short of tile when remodeling your bathroom. An additional 20% of tile for 66 square feet equals an additional 13.2 square feet of tile. I suggest rounding up the tile to 14 additional square feet for the waste factor.

• 66 square feet+ 14 square feet = 80 square feet of field tile.

Next you need to measure for the trim pieces to finish the edges of the tile. The trim pieces will finish off the edge of the tile running horizontally on each of the two end walls, and the top of the tile on all three walls running vertically. Trim pieces are sold in linear feet. Trim pieces usually range from 8 inches to 12 inches in length.

In our example, the one wall is 5 feet in length and the two end walls are each 3 feet in length. The tile is set 6 feet above the top of the tub deck; the tub is 14 inches tall. Again, I always round up the measurement to the next highest foot measurement. In this case, I would round 14 inches up to the next highest foot measurement, which is 24 inches (2 feet). Add these two measurements together:

• 6′ + 2′ (14″ rounded up) = 8′

Remember, you have to finish off the edge of the tile on both end walls, so you need to double this measurement:

• 8′ + 8′ = 16′

In this example, you need 16′ (linear feet) of trim tile to finish off the edge of the tile for each of the two end walls.

You can use colorful lights with good designs to decorate your bathroom. You can use lights which can be made dimmer and it can give different shades to your bathroom at different times of the day you can be published without charge. You can to republish this article in your website or blog. Please provide links Active.