One of the most important features in a bathroom, as it is looked into everyday, a bathroom wall mirror must not purely be straight but secure as well. Properly install a bathroom mirror that might stay put, by following the quick steps. 

Examine the mirror and be certain it came with four clips to hold it in place. Nearly all mirrors are prepackaged with clips, but in case they are not, measure the thickness of the mirror and then take a visit to the hardware store to search for some L-shaped clips to screw into your wall and hold your mirror in place. 

Place a level up against the wall with the top portion of the level positioned where you want the bottom of your mirror to be. Draw a straight line on the wall with a pencil. Draw the line longer than the width of the mirror. 

Measure the width of your mirror. Mark two dots on the level line where the clips will screw into the wall. Position the clips at the corner of the mirror. Install the clips onto the wall using screws plus a cordless drill. 

Measure the apex of the bathroom mirror. Use this measurement to mark two additional dots with the pencil where the top 2 clips ought to go. Attach the underside of the ruler to the lower clips plus make the mark. Draw lines from the bottom clips to the top dots plus use the level to make sure the lines are straight. 

Verify [that the] area between the top dots are the identical distance apart as the bottom clips. 

Install the op [two clips if measurements are the same. Make certain each clip are secure. 

Place the mirror in place by sliding the top of it into the top] clips and then popping the bottom of the mirror into the underside clips. 

Putting in a mirror is an important job. Everyone needs to see what they appear like before going out into the world. Women want to see well to put their make-up on, and the guys wish to have to see to shave. Hanging the mirror is just not difficult, unless you have a terribly giant mirror. Then you’ll need some help lifting  it into place or holding while you mark for the hangers. There are actually 2 kinds of mirrors, framed plus frameless. They need different methods to install, so you first must be familiar with what type of mirror you’re going to hang.